13549213581 肖生

 

UNITREX® C30

 

Polyetheretherketone

 

Nytef Plastics, Ltd.

 

Technical Data

 

Product Description

 

UNITREX C30 extruded thermoplastic shapes provide users with the toughness, strength and chemical resistance inherent in unfilled PEEK as well as enhanced stiffness and compressive strength with improved dimensional stability through the addition of carbon fiber. UNITREX C30 shapes offer excellent wear resistance and a very low coefficient of friction.

 

UNITREX C30 is available in multiple rod and plate configurations by special order. Minimum order quantities may apply, dependent on specific product configuration.

 

General

 

Material Status • Commercial: Active

Literature 1 • Technical Datasheet (English)

Availability • Europe • North America

Filler / Reinforcement • Carbon Fiber

• Good Chemical Resistance • Good Toughness

Features • Good Compressive Strength • Good Wear Resistance • Low Friction

• Good Dimensional Stability • High Strength

Appearance • Black

Forms • Preformed Parts • Rod

 

Physical Nominal Value (English) Nominal Value (SI) Test Method

Specific Gravity 1.41 1.41 g/cm³ ASTM D792

Water Absorption (24 hr) < 0.20 % < 0.20 % ASTM D570

Mechanical Nominal Value (English) Nominal Value (SI) Test Method

Tensile Modulus 1.89E+6 psi 13000 MPa ASTM D638

Tensile Strength (Yield) 31900 psi 220 MPa ASTM D638

Tensile Elongation (Break) 2.0 % 2.0 % ASTM D638

Flexural Modulus 2.61E+6 psi 18000 MPa ASTM D790

Flexural Strength 51900 psi 358 MPa ASTM D790

Coefficient of Friction 3 0.16 0.16

Impact Nominal Value (English) Nominal Value (SI) Test Method

Notched Izod Impact 1.1 ft•lb/in 59 J/m ASTM D256

Hardness Nominal Value (English) Nominal Value (SI) Test Method

Rockwell Hardness (M-Scale) 107 107 ASTM D785

Thermal Nominal Value (English) Nominal Value (SI) Test Method

Deflection Temperature Under Load ASTM D648

264 psi (1.8 MPa), Unannealed 600 °F 316 °C

Glass Transition Temperature 290 °F 143 °C ASTM D3418

CLTE - Flow 7.8E-6 in/in/°F 1.4E-5 cm/cm/°C ASTM D696

RTI Str 460 °F 238 °C UL 746

Flammability Nominal Value (English) Nominal Value (SI) Test Method

Flame Rating (0.118 in (3.00 mm)) V-0 V-0 UL 94

 

 

 

 

 

 

 

 

聚醚醚酮,PEEK UNITREX® C30是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123 

13549213581 肖生