|
聚醚醚酮,PEEK VAMPEEK A 5010东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123
13549213581 肖生
VAMPEEK A 5010
Polyetheretherketone
Vamp Tech
Technical Data
Product Description
PEEK 50% glass fiber reinforced, low viscosity, UL 94 V0, halogen and red phosphorus free.
General
Material Status • Commercial: Active
• Technical Datasheet (English)
Literature 1 • Technical Datasheet (German)
• Technical Datasheet (Italian)
Search for UL Yellow Card • Vamp Tech
Availability • Africa & Middle East • Europe • North America
• Asia Pacific • Latin America
Filler / Reinforcement • Glass Fiber, 50% Filler by Weight
Features • Halogen Free • Low (to None) Phosphorus • Low Viscosity
Content
Physical Nominal Value (English) Nominal Value (SI) Test Method
Specific Gravity 1.67 1.67 g/cm³ ASTM D792
Molding Shrinkage ASTM D955
Flow 1.0E-3 in/in 0.10 %
Across Flow 4.0E-3 in/in 0.40 %
Mechanical Nominal Value (English) Nominal Value (SI) Test Method
Tensile Modulus 2.47E+6 psi 17000 MPa ASTM D638
Tensile Strength (Yield) 25400 psi 175 MPa ASTM D638
Tensile Elongation (Break) 1.6 % 1.6 % ASTM D638
Impact Nominal Value (English) Nominal Value (SI) Test Method
Notched Izod Impact Strength 3.3 ft•lb/in² 7.0 kJ/m² ISO 180/A
Unnotched Izod Impact Strength 24 ft•lb/in² 50 kJ/m² ISO 180
Thermal Nominal Value (English) Nominal Value (SI) Test Method
Deflection Temperature Under Load ASTM D648A
264 psi (1.8 MPa), Unannealed 626 °F 330 °C
Vicat Softening Temperature 635 °F 335 °C ASTM D1525 3
RTI Elec 464 °F 240 °C UL 746
RTI Imp 464 °F 240 °C UL 746
RTI Str 464 °F 240 °C UL 746
Electrical Nominal Value (English) Nominal Value (SI) Test Method
Surface Resistivity 1.0E+14 ohms 1.0E+14 ohms ASTM D257
Comparative Tracking Index 200 V 200 V IEC 60112
Flammability Nominal Value (English) Nominal Value (SI) Test Method
Flame Rating UL 94
0.0630 in (1.60 mm) V-0 V-0
0.126 in (3.20 mm) V-0 V-0
Injection Nominal Value (English) Nominal Value (SI)
Drying Temperature 248 °F 120 °C
Drying Time 3.0 hr 3.0 hr
Processing (Melt) Temp 734 °F 390 °C
Mold Temperature 356 °F 180 °C
聚醚醚酮,PEEK VAMPEEK A 5010是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123
13549213581 肖生
|
