13549213581 肖生

 

 

TECAPEEK® GF30

 

Polyetheretherketone

 

Ensinger Inc.

 

Technical Data

 

Product Description

 

TECAPEEK® GF30 is Ensinger's 30% glass fiber reinforced TECAPEEK product. Made with Victrex 450 GL30 PEEK polymer, it offers enhanced mechanical and thermal properties over those of our basic TECAPEEK offering. It also offers excellent resistance in harsh chemical environments and is electrically insulative.

 

TECAPEEK™s exceptional property profile enables it to be utilized in many of the most critical areas in general industry, as well as in the automotive, marine, nuclear, oil well, electronics, medical and aerospace fields.

 

General

 

Material Status • Commercial: Active

Literature 1 • Technical Datasheet (English)

Availability • North America

Filler / Reinforcement • Glass Fiber, 30% Filler by Weight

• Electrically Insulating • Good Dimensional Stability • Hydrolysis Resistant

Features • Good Abrasion Resistance • Good Wear Resistance • Low Smoke Emission

• Good Chemical Resistance • High Heat Resistance • Radiation (Gamma) Resistant

• Aerospace Applications • Industrial Applications • Nuclear Power Applications

Uses • Automotive Applications • Marine Applications

• Electrical/Electronic • Medical/Healthcare • Oil/Gas Applications

Applications Applications

Forms • Shapes

 

Physical Nominal Value (English) Nominal Value (SI) Test Method

Specific Gravity 1.53 1.53 g/cm³ ASTM D792

Water Absorption (73°F (23°C), 24 hr) 0.11 % 0.11 % ASTM D570

Mechanical Nominal Value (English) Nominal Value (SI) Test Method

Tensile Modulus - 1% Secant (73°F (23°C)) 1.41E+6 psi 9700 MPa ASTM D638

Tensile Strength (Yield, 73°F (23°C)) 22800 psi 157 MPa ASTM D638

Tensile Elongation (Break, 73°F (23°C)) 2.2 % 2.2 % ASTM D638

Flexural Modulus (73°F (23°C)) 1.50E+6 psi 10300 MPa ASTM D790

Flexural Strength (73°F (23°C)) 33800 psi 233 MPa ASTM D790

Compressive Strength (73°F (23°C)) 31200 psi 215 MPa ASTM D695

Shear Strength (73°F (23°C)) 14100 psi 97.2 MPa ASTM D3846

Coefficient of Friction 3 0.30 0.30

Impact Nominal Value (English) Nominal Value (SI) Test Method

Notched Izod Impact (73°F (23°C)) 1.8 ft•lb/in 96 J/m ASTM D256

Hardness Nominal Value (English) Nominal Value (SI) Test Method

Rockwell Hardness (M-Scale) 103 103 ASTM D785

Thermal Nominal Value (English) Nominal Value (SI) Test Method

Deflection Temperature Under Load ASTM D648

264 psi (1.8 MPa), Unannealed, 0.250 in (6.35 600 °F 316 °C

mm)

Continuous Use Temperature 500 °F 260 °C

Melting Temperature 633 °F 334 °C

CLTE - Flow 1.2E-5 in/in/°F 2.2E-5 cm/cm/°C ASTM D696

Thermal Conductivity 3.0 Btu•in/hr/ft²/°F 0.43 W/m/K ASTM C177

Electrical Nominal Value (English) Nominal Value (SI) Test Method

Surface Resistivity 1.0E+16 ohms 1.0E+16 ohms ASTM D257

Volume Resistivity (73°F (23°C)) 1.0E+16 ohms•cm 1.0E+16 ohms•cm ASTM D257

Dielectric Strength 180 V/mil 6.9 kV/mm ASTM D149

Flammability Nominal Value (English) Nominal Value (SI) Test Method

Flame Rating V-0 V-0 UL 94

 

 

 

 

 

聚醚醚酮,PEEK TECAPEEK® GF30是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123 

13549213581 肖生