|
聚醚醚酮,PEEK TECAPEEK® CF30东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123
13549213581 肖生
TECAPEEK® CF30
Polyetheretherketone
Ensinger Inc.
Technical Data
Product Description
TECAPEEK® CF30 is a 30% carbon filled version of Ensinger's standard TECAPEEK which offers improved strength and stiffness as well as greater load bearing capabilities for those applications that require it.
TECAPEEK™s exceptional property profile enables it to be utilized in many of the most critical areas in general industry, as well as in the automotive, marine, nuclear, oil well, electronics, medical and aerospace fields.
General
Material Status • Commercial: Active
Literature 1 • Technical Datasheet (English)
Availability • North America
Filler / Reinforcement • Carbon Fiber, 30% Filler by Weight
Features • Good Abrasion Resistance • Good Dimensional Stability • High Heat Resistance
• Good Chemical Resistance • Good Wear Resistance • Hydrolysis Resistant
• Aerospace Applications • Industrial Applications • Nuclear Power Applications
Uses • Automotive Applications • Marine Applications
• Electrical/Electronic • Medical/Healthcare • Oil/Gas Applications
Applications Applications
Forms • Shapes
Physical Nominal Value (English) Nominal Value (SI) Test Method
Specific Gravity 1.41 1.41 g/cm³ ASTM D792
Water Absorption (73°F (23°C), 24 hr) 0.060 % 0.060 % ASTM D570
Mechanical Nominal Value (English) Nominal Value (SI) Test Method
Tensile Modulus - 1% Secant (73°F (23°C)) 1.89E+6 psi 13000 MPa ASTM D638
Tensile Strength (Yield, 73°F (23°C)) 27000 psi 186 MPa ASTM D638
Tensile Elongation (Break, 73°F (23°C)) 1.1 % 1.1 % ASTM D638
Flexural Modulus (73°F (23°C)) 1.85E+6 psi 12800 MPa ASTM D790
Flexural Strength (73°F (23°C)) 46100 psi 318 MPa ASTM D790
Compressive Strength (73°F (23°C)) 34800 psi 240 MPa ASTM D695
Shear Strength (73°F (23°C)) 14100 psi 97.2 MPa ASTM D3846
Coefficient of Friction 3 0.22 0.22
Impact Nominal Value (English) Nominal Value (SI) Test Method
Notched Izod Impact (73°F (23°C)) 0.90 ft•lb/in 48 J/m ASTM D256
Hardness Nominal Value (English) Nominal Value (SI) Test Method
Rockwell Hardness (M-Scale) 107 107 ASTM D785
Thermal Nominal Value (English) Nominal Value (SI) Test Method
Deflection Temperature Under Load ASTM D648
264 psi (1.8 MPa), Unannealed, 0.250 in (6.35 600 °F 316 °C
mm)
Continuous Use Temperature 500 °F 260 °C
Melting Temperature 633 °F 334 °C
CLTE - Flow 8.0E-6 in/in/°F 1.4E-5 cm/cm/°C ASTM D696
Thermal Conductivity 6.4 Btu•in/hr/ft²/°F 0.92 W/m/K ASTM C177
Flammability Nominal Value (English) Nominal Value (SI) Test Method
Flame Rating V-0 V-0 UL 94
Additional Information Nominal Value (English) Nominal Value (SI)
Limiting Pressure Velocity - 1200 in/min 385000 psi•fpm 385000 psi•fpm
(68°F (20°C))
Data based on injection molded samples.
聚醚醚酮,PEEK TECAPEEK® CF30是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123
13549213581 肖生
|
