13549213581 肖生

 

UNITREX® Unfilled PEEK

 

Polyetheretherketone

 

Nytef Plastics, Ltd.

 

Technical Data

 

Product Description

 

Unitrex PEEK is a semi-crystalline high temperature thermoplastic that offers design engineers a truly unique combination of exceptional performance characteristics. When compared with other engineering polymers, this material ranks as the best or nearly the best in every performance category. Unitrex PEEK has a relative thermal index of 480°F and has a UL 94 flammability rating of V-0, with very low levels of smoke generation and toxic gas emission. Additionally, this material exhibits excellent electrical properties, which remain stable over a wide range of both temperatures and frequencies.

 

Unitrex PEEK is chemically resistant to a wide range of organic and inorganic liquids and is insoluble in all common solvents. In addition, it is unaffected by steam and hot water and has a very low moisture absorption rate. This material offers superior dimensional stability and machines easily. While unfilled Unitrex PEEK offers good wear resistance, Unitrex L has been reinforced with graphite and PTFE to provide an ideal combination of low friction and enhanced wear. For applications that require improved strength and stiffness, a 30% glass fiber filled grade is available (Unitrex Rg-30). Unfilled Unitrex PEEK stock shapes are light beige in color and are available from Nytef Plastics in a full range of heavy gauge rod, plate and tubular bar sizes.

 

PRODUCT ATTRIBUTES

 

• 480°F relative thermal index temperature 

 

• Excellent strength, rigidity and toughness, even at elevated temperatures 

 

• Chemically resistant to all common solvents 

 

• Low moisture absorption 

 

• Superior electrical properties 

 

• Exceptional dimensional stability 

 

• Rated UL V-0 with low smoke and toxic gas emissions 

 

• Easily machined and fabricated 

 

• FDA compliant 

 

UNITREX Rg

 

• 30% Glass fiber filled grade for improved strength and stiffness

 

UNITREX L

 

• Bearing and wear grade offers lower coefficient of friction and improved wear resistance

 

INDUSTRIES

 

• Medical and pharmaceutical 

 

• Aircraft and aerospace 

 

• Fluid handling 

 

• Electrical and electronics manufacturing 

 

• Automotive and transportation 

 

• Petroleum industry 

 

APPLICATIONS

 

• Medical instruments 

 

• Analytical instrumentation 

 

• Semiconductor wafer handling components 

 

• Compressor components and seals 

 

• Pump wear rings 

 

• Bearings and bushings 

 

General

 

Material Status • Commercial: Active

Literature 1 • Technical Datasheet (English)

Availability • Europe • North America

• Food Contact Acceptable • Good Toughness • Low Smoke Emission

Features • Good Chemical Resistance • High Rigidity • Low Toxicity

• Good Dimensional Stability • High Strength • Machinable

• Good Electrical Properties • Low Moisture Absorption • Semi Crystalline

 

UNITREX® Unfilled PEEK

 

Polyetheretherketone

 

Nytef Plastics, Ltd.

General

• Automotive Applications • Fluid Handling • Pump Parts

• Bearings • Medical Devices

Uses • Seals

• Bushings • Medical/Healthcare

• Semiconductor Molding

• Electrical/Electronic Applications

• Compounds

Applications Pharmaceuticals

Agency Ratings • FDA Unspecified Rating • USDA Unspecified Approval

Appearance • Beige

Forms • Preformed Parts • Rod

Physical Nominal Value (English) Nominal Value (SI) Test Method

Specific Gravity 1.32 1.32 g/cm³ ASTM D792

Water Absorption ASTM D570

24 hr 0.20 % 0.20 %

Saturation 0.50 % 0.50 %

Mechanical Nominal Value (English) Nominal Value (SI) Test Method

Tensile Modulus 620000 psi 4270 MPa ASTM D638

Tensile Strength (Yield) 14000 psi 96.5 MPa ASTM D638

Tensile Elongation (Break) 60 % 60 % ASTM D638

Flexural Modulus 600000 psi 4140 MPa ASTM D790

Flexural Strength 25000 psi 172 MPa ASTM D790

Compressive Strength 17100 psi 118 MPa ASTM D695

Coefficient of Friction 0.58 0.58 Internal Method

Impact Nominal Value (English) Nominal Value (SI) Test Method

Notched Izod Impact 1.2 ft•lb/in 64 J/m ASTM D256

Hardness Nominal Value (English) Nominal Value (SI) Test Method

Rockwell Hardness ASTM D785

M-Scale 99 99

R-Scale 126 126

Thermal Nominal Value (English) Nominal Value (SI) Test Method

Deflection Temperature Under Load ASTM D648

264 psi (1.8 MPa), Unannealed 320 °F 160 °C

Peak Melting Temperature 644 °F 340 °C ASTM D3418

CLTE - Flow 2.6E-5 in/in/°F 4.7E-5 cm/cm/°C ASTM D696

RTI Elec 480 °F 249 °C UL 746

RTI Imp 480 °F 249 °C UL 746

RTI Str 480 °F 249 °C UL 746

Electrical Nominal Value (English) Nominal Value (SI) Test Method

Volume Resistivity > 1.0E+16 ohms•cm > 1.0E+16 ohms•cm ASTM D257

Dielectric Strength 3 480 V/mil 19 kV/mm ASTM D149

Dielectric Constant ASTM D150

60 Hz 3.50 3.50

1 MHz 3.20 3.20

Dissipation Factor (60 Hz) 3.0E-3 3.0E-3 ASTM D150

Flammability Nominal Value (English) Nominal Value (SI) Test Method

Flame Rating (0.125 in (3.18 mm)) V-0 V-0 UL 94

 

 

 

 

 

聚醚醚酮,PEEK UNITREX® Unfilled PEEK是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123 

13549213581 肖生