|
聚醚醚酮,PEEK SUSTAPEEK MOD东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123
13549213581 肖生
SUSTAPEEK MOD
Polyetheretherketone
Röchling Sustaplast SE & Co. KG
Technical Data
Product Description
Product characteristics
• Excellent sliding and abrasion behaviour
• High mechanical strength
• High dimensional stability
Typical fields of application
• Mechanical engineering
• Conveyor industry
• Precision and electrical industries
General
Material Status • Commercial: Active
Literature 1 • Technical Datasheet (English)
Search for UL Yellow Card • Röchling Sustaplast SE & Co. KG
Availability • Asia Pacific • Latin America
• Europe • North America
Features • Good Abrasion Resistance • High Strength
• Good Dimensional Stability • Low Friction
Uses • Conveyors • Electrical/Electronic • Engineered Applications
Applications
Physical Nominal Value (English) Nominal Value (SI) Test Method
Density 1.46 g/cm³ 1.46 g/cm³ ISO 1183
Water Absorption ISO 62
Equilibrium, 73°F (23°C), 50% RH 0.15 % 0.15 %
Mechanical Nominal Value (English) Nominal Value (SI) Test Method
Tensile Modulus 711000 psi 4900 MPa ISO 527-2
Tensile Stress (Yield) 10900 psi 75.0 MPa ISO 527-2
Tensile Strain (Break) 4.0 % 4.0 % ISO 527-2
Impact Nominal Value (English) Nominal Value (SI) Test Method
Charpy Notched Impact Strength 2.4 ft•lb/in² 5.0 kJ/m² ISO 179
Hardness Nominal Value (English) Nominal Value (SI) Test Method
Shore Hardness (Shore D) 85 85 ISO 868
Ball Indentation Hardness 31900 psi 220 MPa ISO 2039-1
Thermal Nominal Value (English) Nominal Value (SI) Test Method
Heat Deflection Temperature ISO 75-2/A
264 psi (1.8 MPa), Unannealed 559 °F 293 °C
Continuous Use Temperature
-- 3 -22.0 to 482 °F -30.0 to 250 °C
-- 4 < 590 °F < 310 °C
Melting Temperature 649 °F 343 °C ISO 11357-3
CLTE - Flow 1.7E-5 in/in/°F 3.0E-5 cm/cm/°C DIN 53752
Thermal Conductivity 1.7 Btu•in/hr/ft²/°F 0.24 W/m/K DIN 52612
Electrical Nominal Value (English) Nominal Value (SI) Test Method
Surface Resistivity 1.0E+7 to 1.0E+9 ohms 1.0E+7 to 1.0E+9 ohms IEC 60093
Volume Resistivity 1.0E+7 to 1.0E+9 ohms•cm 1.0E+7 to 1.0E+9 ohms•cm IEC 60093
Flammability Nominal Value (English) Nominal Value (SI) Test Method
Flame Rating UL 94
0.118 in (3.00 mm) V-0 V-0
0.236 in (6.00 mm) V-0 V-0
聚醚醚酮,PEEK SUSTAPEEK MOD是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123
13549213581 肖生
|
