13549213581 肖生

 

TECAPEEK® TECAPEEK®

 

Polyetheretherketone

 

Ensinger Inc.

 

Technical Data

 

Product Description

 

TECAPEEK® stock shapes are made exclusively with Victrex PEEK polymer. TECAPEEK is a unique, semi-crystalline, high temperature engineering thermoplastic. It is an excellent material for a wide spectrum of applications where thermal, chemical, and combustion properties are critical to performance. Especially significant in this regard is TECAPEEK's ability to retain its flexural and tensile properties at very high temperatures in excess of 250°C (482°F). The addition of glass fiber or carbon fiber reinforcements enhances the mechanical and thermal properties of the basic TECAPEEK® material.

 

TECAPEEK™s exceptional property profile enables it to be utilized in many of the most critical areas in general industry, as well as in the automotive, marine, nuclear, oil well, electronics, medical and aerospace fields.

 

General

 

Material Status • Commercial: Active

Literature 1 • Technical Datasheet (English)

Availability • North America

• Good Abrasion Resistance • High Heat Resistance • Low Smoke Emission

Features • Good Chemical Resistance • High Impact Resistance • Radiation (Gamma) Resistant

• Good Wear Resistance • Hydrolysis Resistant • Semi Crystalline

• Aerospace Applications • Industrial Applications • Nuclear Power Applications

Uses • Automotive Applications • Marine Applications

• Electrical/Electronic • Medical/Healthcare • Oil/Gas Applications

Applications Applications

Forms • Shapes

Physical Nominal Value (English) Nominal Value (SI) Test Method

Specific Gravity 1.30 1.30 g/cm³ ASTM D792

Water Absorption ASTM D570

73°F (23°C), 24 hr 0.50 % 0.50 %

Saturation, 73°F (23°C) 0.50 % 0.50 %

Mechanical Nominal Value (English) Nominal Value (SI) Test Method

Tensile Modulus - 1% Secant (73°F (23°C)) 650000 psi 4480 MPa ASTM D638

Tensile Strength (Yield, 73°F (23°C)) 16000 psi 110 MPa ASTM D638

Tensile Elongation ASTM D638

Yield, 73°F (23°C) 4.9 % 4.9 %

Break, 73°F (23°C) 40 % 40 %

Flexural Modulus (73°F (23°C)) 600000 psi 4140 MPa ASTM D790

Flexural Strength (73°F (23°C)) 26000 psi 179 MPa ASTM D790

Compressive Strength (73°F (23°C)) 17100 psi 118 MPa ASTM D695

Shear Strength (73°F (23°C)) 7600 psi 52.4 MPa ASTM D3846

Coefficient of Friction 3 0.18 0.18

Impact Nominal Value (English) Nominal Value (SI) Test Method

Notched Izod Impact (73°F (23°C)) 0.95 ft•lb/in 51 J/m ASTM D256

Hardness Nominal Value (English) Nominal Value (SI) Test Method

Rockwell Hardness (M-Scale) 99 99 ASTM D785

Thermal Nominal Value (English) Nominal Value (SI) Test Method

Deflection Temperature Under Load ASTM D648

264 psi (1.8 MPa), Unannealed, 0.250 in (6.35 320 °F 160 °C

mm)

Continuous Use Temperature 500 °F 260 °C

Melting Temperature 633 °F 334 °C

CLTE - Flow 2.6E-5 in/in/°F 4.7E-5 cm/cm/°C ASTM D696

Thermal Conductivity 1.7 Btu•in/hr/ft²/°F 0.25 W/m/K ASTM C177

Electrical Nominal Value (English) Nominal Value (SI) Test Method

Surface Resistivity 1.0E+16 ohms 1.0E+16 ohms ASTM D257

Volume Resistivity (73°F (23°C)) 4.9E+16 ohms•cm 4.9E+16 ohms•cm ASTM D257

 

 

TECAPEEK® TECAPEEK®

 

Polyetheretherketone

 

Ensinger Inc.

Electrical Nominal Value (English) Nominal Value (SI) Test Method

Dielectric Strength 190 V/mil 7.5 kV/mm ASTM D149

Flammability Nominal Value (English) Nominal Value (SI) Test Method

Flame Rating V-0 V-0 UL 94

Additional Information Nominal Value (English) Nominal Value (SI)

Limiting Pressure Velocity - 1200 in/min 170000 psi•fpm 170000 psi•fpm

(68°F (20°C))

Data obtained from extruded shapes material

 

 

 

 

 

 

聚醚醚酮,PEEK TECAPEEK® TECAPEEK®是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123 

13549213581 肖生