13549213581 肖生

 

TECAPEEK® TS

 

Polyetheretherketone

 

Ensinger Inc.

 

Technical Data

 

Product Description

 

TECAPEEK® TS offers a property profile well suited to test socket applications. The material exhibits improved hardness along with good toughness and the necessary creep strength to support an extended successful life in the application. These properties are also reflected by the materials excellent machinability that produces low levels of burrs, even with the finest structures. TECAPEEK TS also has a high degree of dimensional stability over a wide temperature range.

 

General

 

Material Status • Commercial: Active

Literature 1 • Technical Datasheet (English)

Availability • North America

• Good Corrosion Resistance • Good Toughness • High Rigidity

Features • Good Dimensional Stability • High Hardness • Low to No Water Absorption

• Good Thermal Stability • High Heat Resistance • Machinable

Forms • Shapes

 

Physical Nominal Value (English) Nominal Value (SI) Test Method

Specific Gravity 1.49 1.49 g/cm³ ASTM D792

Mechanical Nominal Value (English) Nominal Value (SI) Test Method

Tensile Modulus 827000 psi 5700 MPa ASTM D638

Tensile Strength (Yield) 16000 psi 110 MPa ASTM D638

Tensile Elongation (Break) 4.0 % 4.0 % ASTM D638

Flexural Modulus 856000 psi 5900 MPa ASTM D790

Flexural Strength 25400 psi 175 MPa ASTM D790

Compressive Modulus 624000 psi 4300 MPa ASTM D695

Compressive Strength ASTM D695

1% Strain 2470 psi 17.0 MPa

2% Strain 4930 psi 34.0 MPa

Impact Nominal Value (English) Nominal Value (SI) Test Method

Notched Izod Impact 3.3 ft•lb/in 180 J/m ASTM D256

Thermal Nominal Value (English) Nominal Value (SI) Test Method

Deflection Temperature Under Load ASTM D648

264 psi (1.8 MPa), Unannealed 446 °F 230 °C

Peak Melting Temperature 642 °F 339 °C ASTM D3418

Service Temperature - Long Term 500 °F 260 °C

 

 

 

 

 

 

 

聚醚醚酮,PEEK TECAPEEK® TS是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123 

13549213581 肖生