13549213581 肖生

 

VICOTE® 705 Blue

 

Polyetheretherketone

 

Victrex plc

 

Technical Data

 

Product Description

 

VICOTE 705 Blue is a blue pigmented version of the VICOTE 705 grade and contains additives to help with adhesion, wetting of the substrate and shrinkage. This grade has a nominal particle size of ~ 50 microns. The powder is light blue in colour and is a low melt viscosity grade for lower film builds. Typical film thicknesses range from 50 - 80 microns. The final coating takes on a mid blue colour after stoving.

 

The VICTREX® PEEK polymer contained in the VICOTE powder coatings are thermoplastic in nature and exhibits flow above the melt temperature. When processed using the correct guidelines the coatings will exhibit the excellent properties that VICTREX PEEK polymer is renowned for.

 

Typical properties are high continuous use temperature of 260°C, excellent wear, abrasion and cut through resistance at these high temperatures combined with excellent chemical and radiation resistance. VICOTE Coatings have a low level of extractables and are hydrolysis resistant and inherently flame retardant.

 

General

 

Material Status • Commercial: Active

Literature 1 • Brochure - Chemical Resistance (English)

Technical Datasheet (English)

•

Search for UL Yellow Card • Victrex plc

Availability • Europe • North America

Additive • Unspecified Additive

• Flame Retardant • Good Wear Resistance • Low Viscosity

Features • Good Abrasion Resistance • Hydrolysis Resistant

• Radiation (Gamma) Resistant

• Good Chemical Resistance • Low Extractables

Uses • Coating Applications

Agency Ratings • FDA 21 CFR 175.300

Appearance • Blue

Processing Method • Coating • Electrostatic Spray Coating

Physical Nominal Value (English) Nominal Value (SI) Test Method

Density 1.32 g/cm³ 1.32 g/cm³ ISO 1183

Particle Size 1.97 mil 50.0 µm

Thermal Nominal Value (English) Nominal Value (SI) Test Method

Continuous Use Temperature 500 °F 260 °C ASTM D794

Glass Transition Temperature 289 °F 143 °C DSC

Melting Temperature 649 °F 343 °C DSC

RTI Elec 500 °F 260 °C UL 746

RTI Imp 500 °F 260 °C UL 746

RTI Str 500 °F 260 °C UL 746

Additional Information Nominal Value (English) Nominal Value (SI) Test Method

Konig Hardness 3.0 min 3.0 min ISO 1522

 

 

 

 

 

聚醚醚酮,PEEK VICOTE® 705 Blue是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123 

13549213581 肖生