13549213581 肖生

 

VICOTE® F807 Grey

 

Polyetheretherketone

 

Victrex plc

 

Technical Data

 

Product Description

 

VICOTE® F807 Grey Aqueous Dispersion Coatings

 

VICOTE® is the brand name for the Victrex range of coatings. VICOTE Coatings are available through Victrex plc or its preferred coater network.

 

The VICOTE F807 Grey grade has been specifically formulated to provide a resilient coating with high wear and abrasion resistance combined with excellent release properties on ferrous substrates such as carbon and cast steels. These properties are retained at high temperatures where other release coatings would potentially fail. VICOTE dispersions have a low level of extractables. Contact Victrex plc for further details.

 

VICOTE F807 Grey dispersions are aqueous based however there are small amounts of solvents present. Refer to the appropriate MSDS sheet for details.

 

The VICTREX® PEEK polymer contained in the VICOTE dispersions like other non-coating grades of VICTREX PEEK polymer is thermoplastic in nature and exhibits flow above the melt temperature. When processed using the correct guidelines the coatings will exhibit the excellent properties that VICTREX PEEK polymer is renowned for.

 

VICOTE Coatings have excellent chemical resistance. Consult the Victrex Chemical Resistance Data Base for further details.

 

General

 

Material Status • Commercial: Active

Literature 1 • Brochure - Chemical Resistance (English)

Technical Datasheet (English)

•

Search for UL Yellow Card • Victrex plc

Availability • Europe • North America

Additive • Unspecified Additive

Features • Good Abrasion Resistance • Good Wear Resistance • Resilient

• Good Chemical Resistance • Low Extractables

Uses • Coating Applications

Agency Ratings • FDA 21 CFR 175.300

Appearance • Grey

Processing Method • Coating • Electrostatic Spray Coating

Physical Nominal Value (English) Nominal Value (SI) Test Method

pH 10.0 10.0 Internal Method

Viscosity (77°F (25°C)) 17.0 sec 17.0 sec ISO 2431

Weight - Solids 39 % 39 % Internal Method

Thermal Nominal Value (English) Nominal Value (SI) Test Method

Melting Temperature 3 649 °F 343 °C DSC

Additional Information Nominal Value (English) Nominal Value (SI) Test Method

Cross Hatch Adhesion ISO 2409

Aluminum 0 0

Mild Steel 0 0

Stainless Steel 0 0

Direct Impact ISO 6272

Height 39 in 100.00 cm

Indentation Depth 0.20 in 0.50 cm

Weight 2000 g 2000 g

S.G. (77°F (25°C)) 3.97E-5 lb/in³ 1.10 kg/m³ ISO 2811

Theory Volume Solids 26 % 26 %

 

 

 

 

聚醚醚酮,PEEK VICOTE® F807 Grey是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123 

13549213581 肖生