|
聚醚醚酮,PEEK VICTREX® PEEK 90GL60东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123
13549213581 肖生
VICTREX® PEEK 90GL60
Polyetheretherketone
Victrex plc
Technical Data
Product Description
High performance thermoplastic material, 60% glass fibre reinforced PolyEtherEtherKetone (PEEK), semi crystalline, granules for injection moulding, standard flow, FDA food contact compliant, colour natural/beige.
Applications where higher strength in a static system is required. Low coefficient of thermal expansion. Chemically resistant to aggressive environments, suitable for sterilization for medical and food contact applications.
General
Material Status • Commercial: Active
• Brochure - Chemical Resistance (English)
• Processing - Victrex PEEK Compression Molding Guide (English)
Literature 1 • Processing - Victrex PEEK Extrusion Guide (English)
Processing - Victrex PEEK Finishing Operations (English)
•
• Processing - Victrex PEEK Injection Molding Guide (English)
• Technical Datasheet (English)
UL Yellow Card 2 • E161131-531778
Search for UL Yellow Card • Victrex plc
• VICTREX® PEEK
Availability • Asia Pacific • Europe • North America
Filler / Reinforcement • Glass Fiber, 60% Filler by Weight
Features • Food Contact Acceptable • Good Flow • High Strength
• Good Chemical Resistance • Good Sterilizability • Semi Crystalline
Agency Ratings • FDA Food Contact, Unspecified Rating
Appearance • Beige • Natural Color
Forms • Granules
Processing Method • Injection Molding
Physical Nominal Value (English) Nominal Value (SI) Test Method
Density 4 1.83 g/cm³ 1.83 g/cm³ ISO 1183
Spiral Flow 5 3.94 in 10.0 cm Internal Method
Molding Shrinkage 6 ISO 294-4
Across Flow : 374°F (190°C) 0.60 % 0.60 %
Flow : 374°F (190°C), 0.118 in (3.00 mm) 0.30 % 0.30 %
Water Absorption ISO 62
73°F (23°C), 24 hr, 0.126 in (3.20 mm) 0.020 % 0.020 %
Equilibrium, 73°F (23°C), 0.126 in (3.20 mm), 0.40 % 0.40 %
50% RH
Mechanical Nominal Value (English) Nominal Value (SI) Test Method
Tensile Modulus (73°F (23°C)) 3.63E+6 psi 25000 MPa ISO 527-2
Tensile Stress ISO 527-2
Break, 73°F (23°C) 33400 psi 230 MPa
Break, 257°F (125°C) 21000 psi 145 MPa
Break, 347°F (175°C) 13100 psi 90.0 MPa
Break, 437°F (225°C) 10200 psi 70.0 MPa
Break, 527°F (275°C) 7250 psi 50.0 MPa
Tensile Strain (Break, 73°F (23°C)) 1.5 % 1.5 % ISO 527-2
Flexural Modulus (73°F (23°C)) 3.48E+6 psi 24000 MPa ISO 178
Flexural Stress (73°F (23°C)) 50800 psi 350 MPa ISO 178
Compressive Stress ISO 604
73°F (23°C) 33400 psi 230 MPa
248°F (120°C) 20300 psi 140 MPa
392°F (200°C) 9430 psi 65.0 MPa
VICTREX® PEEK 90GL60
Polyetheretherketone
Victrex plc
Impact Nominal Value (English) Nominal Value (SI) Test Method
Notched Izod Impact Strength (73°F (23°C)) 5.0 ft•lb/in² 11 kJ/m² ISO 180/A
Unnotched Izod Impact Strength (73°F (23°C)) 21 ft•lb/in² 45 kJ/m² ISO 180
Hardness Nominal Value (English) Nominal Value (SI) Test Method
Shore Hardness (Shore D, 73°F (23°C)) 87 87 ISO 868
Thermal Nominal Value (English) Nominal Value (SI) Test Method
Heat Deflection Temperature ISO 75-2/A
264 psi (1.8 MPa), Unannealed 649 °F 343 °C
Glass Transition Temperature 289 °F 143 °C ISO 11357-2
Melting Temperature 649 °F 343 °C ISO 11357-3
CLTE ISO 11359-2
Flow : < 289°F (< 143°C) 7.2E-6 in/in/°F 1.3E-5 cm/cm/°C
Flow : > 289°F (> 143°C) 8.3E-6 in/in/°F 1.5E-5 cm/cm/°C
Transverse : < 289°F (< 143°C) 1.7E-5 in/in/°F 3.0E-5 cm/cm/°C
Transverse : > 289°F (> 143°C) 3.9E-5 in/in/°F 7.0E-5 cm/cm/°C
Specific Heat (73°F (23°C)) 0.406 Btu/lb/°F 1700 J/kg/°C DSC
Thermal Conductivity (73°F (23°C)) 3.2 Btu•in/hr/ft²/°F 0.46 W/m/K ISO 22007-4
Electrical Nominal Value (English) Nominal Value (SI) Test Method
Volume Resistivity 1.0E+16 ohms•cm 1.0E+16 ohms•cm IEC 60093
Electric Strength (0.0984 in (2.50 mm)) 560 V/mil 22 kV/mm IEC 60243-1
Dielectric Constant (73°F (23°C), 1 kHz) 3.80 3.80 IEC 60250
Dissipation Factor (73°F (23°C), 1 MHz) 4.0E-3 4.0E-3 IEC 60250
Comparative Tracking Index 150 V 150 V IEC 60112
Flammability Nominal Value (English) Nominal Value (SI) Test Method
Glow Wire Flammability Index IEC 60695-2-12
0.0787 in (2.00 mm) 1760 °F 960 °C
Fill Analysis Nominal Value (English) Nominal Value (SI) Test Method
Melt Viscosity (752°F (400°C)) 500 Pa•s 500 Pa•s ISO 11443
Injection Nominal Value (English) Nominal Value (SI)
Drying Temperature 248 to 302 °F 120 to 150 °C
Drying Time 3.0 to 5.0 hr 3.0 to 5.0 hr
Hopper Temperature < 212 °F < 100 °C
Rear Temperature 680 °F 360 °C
Middle Temperature 689 °F 365 °C
Front Temperature 707 °F 375 °C
Nozzle Temperature 716 °F 380 °C
Mold Temperature 356 to 410 °F 180 to 210 °C
Injection Notes
Runner: Die / nozzle >3mm, manifold >3.5mm
Gate: >2mm or 0.5 x part thickness
聚醚醚酮,PEEK VICTREX® PEEK 90GL60是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123
13549213581 肖生
|
