13549213581 肖生

 

VICTREX® PEEK 150CA30

 

Polyetheretherketone

 

Victrex plc

 

Technical Data

 

Product Description

 

High performance thermoplastic material, 30% carbon fibre reinforced PolyEtherEtherKetone (PEEK), semi crystalline, granules for injection moulding, easy flow, FDA food contact compliant, colour black.

 

Complex geometries with thin cross sections or long flow length where higher strength in a static or dynamic system is required. Excellent wear resistance, low coefficient of friction, low coefficient of thermal expansion. Chemically resistant to aggressive environments.

 

General

 

Material Status • Commercial: Active

• Brochure - Chemical Resistance (English)

• Processing - Victrex PEEK Compression Molding Guide (English)

Literature 1 • Processing - Victrex PEEK Extrusion Guide (English)

Processing - Victrex PEEK Finishing Operations (English)

•

• Processing - Victrex PEEK Injection Molding Guide (English)

• Technical Datasheet (English)

UL Yellow Card 2 • E161131-224300

E161131-531782

•

Search for UL Yellow Card • Victrex plc

• VICTREX® PEEK

Availability • Asia Pacific • Europe • North America

Filler / Reinforcement • Carbon Fiber, 30% Filler by Weight

• Food Contact Acceptable • Good Wear Resistance

Features • Good Chemical Resistance • High Strength • Semi Crystalline

• Good Flow • Low Friction

Agency Ratings • FDA Food Contact, Unspecified • Rolls Royce #DMSRR 1018

Rating

Appearance • Black

Forms • Granules

Processing Method • Injection Molding

Physical Nominal Value (English) Nominal Value (SI) Test Method

Density 1.40 g/cm³ 1.40 g/cm³ ISO 1183

Spiral Flow 4, 5 5.51 in 14.0 cm Internal Method

Molding Shrinkage 6

Across Flow : 392°F (200°C) 0.50 % 0.50 %

Flow : 392°F (200°C) 0.0 % 0.0 % ISO 294-4

Water Absorption ISO 62

73°F (23°C), 24 hr, 0.126 in (3.20 mm) 0.040 % 0.040 %

Equilibrium, 73°F (23°C), 0.126 in (3.20 mm), 0.30 % 0.30 %

50% RH

Mechanical Nominal Value (English) Nominal Value (SI) Test Method

Tensile Modulus (73°F (23°C)) 3.77E+6 psi 26000 MPa ISO 527-2

Tensile Stress ISO 527-2

Break, 73°F (23°C) 37700 psi 260 MPa

Break, 257°F (125°C) 21800 psi 150 MPa

Break, 347°F (175°C) 13800 psi 95.0 MPa

Break, 527°F (275°C) 7980 psi 55.0 MPa

Tensile Strain (Break, 73°F (23°C)) 1.5 % 1.5 % ISO 527-2

Flexural Modulus (73°F (23°C)) 3.48E+6 psi 24000 MPa ISO 178

 

VICTREX® PEEK 150CA30

 

Polyetheretherketone

 

Victrex plc

Mechanical Nominal Value (English) Nominal Value (SI) Test Method

Flexural Stress ISO 178

73°F (23°C) 52200 psi 360 MPa

257°F (125°C) 36300 psi 250 MPa

347°F (175°C) 17400 psi 120 MPa

437°F (225°C) 8700 psi 60.0 MPa

Compressive Stress ISO 604

73°F (23°C) 43500 psi 300 MPa

248°F (120°C) 29000 psi 200 MPa

392°F (200°C) 10200 psi 70.0 MPa

Impact Nominal Value (English) Nominal Value (SI) Test Method

Charpy Notched Impact Strength (73°F (23°C)) 2.9 ft•lb/in² 6.0 kJ/m² ISO 179/1eA

Charpy Unnotched Impact Strength ISO 179/1U

73°F (23°C) 21 ft•lb/in² 45 kJ/m²

Notched Izod Impact Strength (73°F (23°C)) 3.6 ft•lb/in² 7.5 kJ/m² ISO 180/A

Unnotched Izod Impact Strength (73°F (23°C)) 19 ft•lb/in² 40 kJ/m² ISO 180

Hardness Nominal Value (English) Nominal Value (SI) Test Method

Shore Hardness (Shore D, 73°F (23°C)) 88 88 ISO 868

Thermal Nominal Value (English) Nominal Value (SI) Test Method

Heat Deflection Temperature ISO 75-2/A

264 psi (1.8 MPa), Unannealed 642 °F 339 °C

Glass Transition Temperature 289 °F 143 °C ISO 11357-2

Melting Temperature 649 °F 343 °C ISO 11357-3

CLTE ISO 11359-2

Flow : < 289°F (< 143°C) 2.8E-6 in/in/°F 5.0E-6 cm/cm/°C

Flow : > 289°F (> 143°C) 3.3E-6 in/in/°F 6.0E-6 cm/cm/°C

Transverse : < 289°F (< 143°C) 2.2E-5 in/in/°F 4.0E-5 cm/cm/°C

Transverse : > 289°F (> 143°C) 5.6E-5 in/in/°F 1.0E-4 cm/cm/°C

Specific Heat (73°F (23°C)) 0.430 Btu/lb/°F 1800 J/kg/°C DSC

Thermal Conductivity (73°F (23°C)) 6.6 Btu•in/hr/ft²/°F 0.95 W/m/K Internal Method

RTI Imp 392 °F 200 °C UL 746

RTI Str 464 °F 240 °C UL 746

Electrical Nominal Value (English) Nominal Value (SI) Test Method

Volume Resistivity 7 (73°F (23°C)) 1.0E+5 ohms•cm 1.0E+5 ohms•cm ASTM D4496

Flammability Nominal Value (English) Nominal Value (SI) Test Method

Glow Wire Flammability Index IEC 60695-2-12

0.0787 in (2.00 mm) 1760 °F 960 °C

Toxicity NES 713

CO Content 0.0500 0.0500

CO2 Content 0.120 0.120

Total Gases 0.170 0.170

Fill Analysis Nominal Value (English) Nominal Value (SI) Test Method

Melt Viscosity (752°F (400°C)) 320 Pa•s 320 Pa•s ISO 11443

Injection Nominal Value (English) Nominal Value (SI)

Drying Temperature 248 to 302 °F 120 to 150 °C

Drying Time 3.0 to 5.0 hr 3.0 to 5.0 hr

Hopper Temperature < 212 °F < 100 °C

Rear Temperature 689 °F 365 °C

Middle Temperature 698 to 707 °F 370 to 375 °C

Front Temperature 716 °F 380 °C

Nozzle Temperature 725 °F 385 °C

Mold Temperature 356 to 410 °F 180 to 210 °C

 

 

 

 

聚醚醚酮,PEEK VICTREX® PEEK 150CA30是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123 

13549213581 肖生