13549213581 肖生

 

VICTREX® PEEK 150GL15

 

Polyetheretherketone

 

Victrex plc

 

Technical Data

 

Product Description

 

High performance thermoplastic material, 15% glass fibre reinforced PolyEtherEtherKetone (PEEK), semi crystalline, granules for injection moulding, very easy flow, FDA food contact compliant, colour natural/beige.

 

Complex geometries with thin cross sections or long flow lengths where good strength in a static system is required. Low coefficient of thermal expansion. Chemically resistant to aggressive environments, suitable for sterilization for medical and food contact applications.

 

General

 

Material Status • Commercial: Active

 

• Brochure - Chemical Resistance (English) 

• Processing - Victrex PEEK Compression Molding Guide (English) 

Literature 1 • Processing - Victrex PEEK Extrusion Guide (English)

Processing - Victrex PEEK Finishing Operations (English)

•

• Processing - Victrex PEEK Injection Molding Guide (English)

• Technical Datasheet (English)

• E161131-100090384

UL Yellow Card 2 • E161131-531779

• E161131-101337133

Search for UL Yellow Card • Victrex plc

• VICTREX® PEEK

Availability • Asia Pacific • Europe • North America

Filler / Reinforcement • Glass Fiber, 15% Filler by Weight

Features • Food Contact Acceptable • Good Flow • High Strength

• Good Chemical Resistance • Good Sterilizability • Semi Crystalline

Uses • Medical/Healthcare • Non-specific Food Applications

Applications

Agency Ratings • FDA Food Contact, Unspecified Rating

Appearance • Beige • Natural Color

Forms • Granules

Processing Method • Injection Molding

Physical Nominal Value (English) Nominal Value (SI) Test Method

Density 4 1.40 g/cm³ 1.40 g/cm³ ISO 1183

Spiral Flow 5, 6 7.09 in 18.0 cm Internal Method

Molding Shrinkage 7 ISO 294-4

Across Flow : 356°F (180°C) 1.0 % 1.0 %

Flow : 356°F (180°C) 0.40 % 0.40 %

Water Absorption ISO 62

73°F (23°C), 24 hr, 0.126 in (3.20 mm) 0.060 % 0.060 %

Equilibrium, 73°F (23°C), 0.126 in (3.20 mm), 0.40 % 0.40 %

50% RH

Mechanical Nominal Value (English) Nominal Value (SI) Test Method

Tensile Modulus (73°F (23°C)) 1.09E+6 psi 7500 MPa ISO 527-2

Tensile Stress (Break, 73°F (23°C)) 19600 psi 135 MPa ISO 527-2

Tensile Strain (Break, 73°F (23°C)) 2.3 % 2.3 % ISO 527-2

Flexural Modulus (73°F (23°C)) 1.09E+6 psi 7500 MPa ISO 178

Flexural Stress (73°F (23°C)) 31900 psi 220 MPa ISO 178

Impact Nominal Value (English) Nominal Value (SI) Test Method

Notched Izod Impact Strength (73°F (23°C)) 2.4 ft•lb/in² 5.0 kJ/m² ISO 180/A

Unnotched Izod Impact Strength (73°F (23°C)) 14 ft•lb/in² 30 kJ/m² ISO 180

Hardness Nominal Value (English) Nominal Value (SI) Test Method

Shore Hardness (Shore D, 73°F (23°C)) 86 86 ISO 868

 

VICTREX® PEEK 150GL15

 

Polyetheretherketone

 

Victrex plc

Thermal Nominal Value (English) Nominal Value (SI) Test Method

Heat Deflection Temperature ISO 75-2/A

264 psi (1.8 MPa), Unannealed 613 °F 323 °C

Glass Transition Temperature 289 °F 143 °C ISO 11357-2

Melting Temperature 649 °F 343 °C ISO 11357-3

CLTE ISO 11359-2

Flow : > 289°F (> 143°C) 1.7E-4 in/in/°F 3.0E-4 cm/cm/°C

Flow : < 289°F (< 143°C) 1.7E-4 in/in/°F 3.0E-4 cm/cm/°C

Transverse : < 289°F (< 143°C) 3.1E-4 in/in/°F 5.5E-4 cm/cm/°C

Transverse : > 289°F (> 143°C) 6.7E-4 in/in/°F 1.2E-3 cm/cm/°C

Specific Heat (73°F (23°C)) 0.406 Btu/lb/°F 1700 J/kg/°C DSC

Thermal Conductivity (73°F (23°C)) 2.1 Btu•in/hr/ft²/°F 0.30 W/m/K Internal Method

Electrical Nominal Value (English) Nominal Value (SI) Test Method

Volume Resistivity 1.0E+16 ohms•cm 1.0E+16 ohms•cm IEC 60093

Electric Strength (0.0787 in (2.00 mm)) 580 V/mil 23 kV/mm IEC 60243-1

Comparative Tracking Index 150 V 150 V IEC 60112

Fill Analysis Nominal Value (English) Nominal Value (SI) Test Method

Melt Viscosity (752°F (400°C)) 210 Pa•s 210 Pa•s ISO 11443

Injection Nominal Value (English) Nominal Value (SI)

Drying Temperature 248 to 302 °F 120 to 150 °C

Drying Time 3.0 to 5.0 hr 3.0 to 5.0 hr

Hopper Temperature < 212 °F < 100 °C

Rear Temperature 671 °F 355 °C

Middle Temperature 680 to 689 °F 360 to 365 °C

Front Temperature 698 °F 370 °C

Nozzle Temperature 707 °F 375 °C

Mold Temperature 338 to 392 °F 170 to 200 °C

Injection Notes

Runner: Die / nozzle >3mm, manifold >3.5mm

 

Gate: >2mm or 0.5 x part thickness

 

 

 

 

 

聚醚醚酮,PEEK VICTREX® PEEK 150GL15是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123 

13549213581 肖生