|
聚醚醚酮,PEEK VICTREX® PEEK 450G903 Black东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123
13549213581 肖生
VICTREX® PEEK 450G903 Black
Polyetheretherketone
Victrex plc
Technical Data
Product Description Product Description:
High performance thermoplastic material, unreinforced PolyEtherEtherKetone (PEEK), semi crystalline, granules for injection moulding and extrusion, standard flow, FDA food contact compliant, colour black.
Typical Application Areas:
Applications for higher strength and stiffness as well as high ductility. Chemically resistant to aggressive environments, suitable for sterilization for medical and food contact applications.
General
Material Status • Commercial: Active
• Brochure - Chemical Resistance (English)
• Processing - Victrex PEEK Compression Molding Guide (English)
Literature 1 • Processing - Victrex PEEK Extrusion Guide (English)
Processing - Victrex PEEK Finishing Operations (English)
•
• Processing - Victrex PEEK Injection Molding Guide (English)
• Technical Datasheet (English)
UL Yellow Card 2 • E161131-224306
Search for UL Yellow Card • Victrex plc
• VICTREX® PEEK
Availability • Europe • North America
• Ductile • Good Flow •
Features • Food Contact Acceptable • Good Sterilizability High Strength
• Good Chemical Resistance • High Stiffness
Uses • Medical Devices
Agency Ratings • FDA Food Contact, Unspecified Rating
Appearance • Black
Forms • Powder
Processing Method • Extrusion • Injection Molding
Physical Nominal Value (English) Nominal Value (SI) Test Method
Density ISO 1183
-- 4 1.26 g/cm³ 1.26 g/cm³
-- 5 1.30 g/cm³ 1.30 g/cm³
Spiral Flow 6, 7 4.33 in 11.0 cm
Molding Shrinkage 8 ISO 294-4
Across Flow 1.3 % 1.3 %
Flow 1.0 % 1.0 %
Water Absorption ISO 62
73°F (23°C), 24 hr, 0.126 in (3.20 mm) 0.070 % 0.070 %
Saturation, 73°F (23°C) 0.40 % 0.40 %
Mechanical Nominal Value (English) Nominal Value (SI) Test Method
Tensile Modulus (73°F (23°C)) 537000 psi 3700 MPa ISO 527-2
Tensile Stress (Yield, 73°F (23°C)) 14500 psi 100 MPa ISO 527-2
Tensile Strain (Break, 73°F (23°C)) 30 % 30 % ISO 527-2
Flexural Modulus (73°F (23°C)) 595000 psi 4100 MPa ISO 178
Flexural Stress ISO 178
3.5% Strain, 73°F (23°C) 17400 psi 120 MPa
73°F (23°C) 9 23200 psi 160 MPa
257°F (125°C) 12300 psi 85.0 MPa
347°F (175°C) 2610 psi 18.0 MPa
527°F (275°C) 1890 psi 13.0 MPa
VICTREX® PEEK 450G903 Black
Polyetheretherketone
Victrex plc
Mechanical Nominal Value (English) Nominal Value (SI) Test Method
Compressive Stress ISO 604
73°F (23°C) 18100 psi 125 MPa
248°F (120°C) 10200 psi 70.0 MPa
Impact Nominal Value (English) Nominal Value (SI) Test Method
Notched Izod Impact Strength (73°F (23°C)) 3.1 ft•lb/in² 6.5 kJ/m² ISO 180/A
Unnotched Izod Impact Strength (73°F (23°C)) No Break No Break ISO 180
Hardness Nominal Value (English) Nominal Value (SI) Test Method
Shore Hardness (73°F (23°C)) 85 85 ISO 868
Thermal Nominal Value (English) Nominal Value (SI) Test Method
Heat Deflection Temperature ISO 75-2/Af
264 psi (1.8 MPa), Unannealed 306 °F 152 °C
Glass Transition Temperature 289 °F 143 °C ISO 11357-2
Melting Temperature 649 °F 343 °C ISO 11357-3
CLTE ISO 11359-2
Flow : < 289°F (< 143°C) 2.5E-5 in/in/°F 4.5E-5 cm/cm/°C
Flow : > 289°F (> 143°C) 6.7E-5 in/in/°F 1.2E-4 cm/cm/°C
Transverse : < 289°F (< 143°C) 3.1E-5 in/in/°F 5.5E-5 cm/cm/°C
Transverse : > 289°F (> 143°C) 7.8E-5 in/in/°F 1.4E-4 cm/cm/°C
Thermal Conductivity (73°F (23°C)) 2.0 Btu•in/hr/ft²/°F 0.29 W/m/K ISO 22007-4
RTI Elec 500 °F 260 °C UL 746
RTI Imp 356 °F 180 °C UL 746
RTI Str 464 °F 240 °C UL 746
Specific Heat Capacity 0.526 Btu/lb/°F 2200 J/kg/°C
Electrical Nominal Value (English) Nominal Value (SI) Test Method
Volume Resistivity IEC 60093
73°F (23°C) 1.0E+16 ohms•cm 1.0E+16 ohms•cm
257°F (125°C) 1.0E+15 ohms•cm 1.0E+15 ohms•cm
527°F (275°C) 1.0E+9 ohms•cm 1.0E+9 ohms•cm
Electric Strength (0.0787 in (2.00 mm)) 610 V/mil 24 kV/mm IEC 60243-1
Comparative Tracking Index 150 V 150 V IEC 60112
Flammability Nominal Value (English) Nominal Value (SI) Test Method
Glow Wire Flammability Index IEC 60695-2-12
0.0787 in (2.00 mm) 1760 °F 960 °C
Oxygen Index ISO 4589-2
-- 10 24 % 24 %
-- 11 35 % 35 %
Toxicity NES 713
-- 12 0.220 0.220
-- 13 0.150 0.150
-- 14 0.0740 0.0740
Fill Analysis Nominal Value (English) Nominal Value (SI) Test Method
Melt Viscosity (752°F (400°C)) 350 Pa•s 350 Pa•s Internal Method
Injection Nominal Value (English) Nominal Value (SI)
Drying Temperature 248 to 302 °F 120 to 150 °C
Drying Time 3.0 to 5.0 hr 3.0 to 5.0 hr
Hopper Temperature < 212 °F < 100 °C
Rear Temperature 698 °F 370 °C
Middle Temperature 680 to 689 °F 360 to 365 °C
Front Temperature 671 °F 355 °C
Nozzle Temperature 707 °F 375 °C
Mold Temperature 338 to 392 °F 170 to 200 °C
聚醚醚酮,PEEK VICTREX® PEEK 450G903 Black是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123
13549213581 肖生
|
