|
聚醚醚酮,PEEK VICTREX® PEEK 450GL30东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123
13549213581 肖生
VICTREX® PEEK 450GL30
Polyetheretherketone
Victrex plc
Technical Data
Product Description
High performance thermoplastic material, 30% glass fibre reinforced PolyEtherEtherKetone (PEEK), semi crystalline, granules for injection moulding and extrusion, standard flow, FDA food contact compliant, colour natural/beige.
Applications for higher strength in a static system. Low coefficient of thermal expansion. Chemically resistant to aggressive environments, suitable for sterilisation for medical and food contact applications.
General
Material Status • Commercial: Active
• Brochure - Chemical Resistance (English)
• Processing - Victrex PEEK Compression Molding Guide (English)
Literature 1 • Processing - Victrex PEEK Extrusion Guide (English)
Processing - Victrex PEEK Finishing Operations (English)
•
• Processing - Victrex PEEK Injection Molding Guide (English)
• Technical Datasheet (English)
UL Yellow Card 2 • E161131-224307
Search for UL Yellow Card • Victrex plc
• VICTREX® PEEK
Availability • Asia Pacific • Europe • North America
Filler / Reinforcement • Glass Fiber, 30% Filler by Weight
Features • Food Contact Acceptable • Good Sterilizability • Low Friction
• Good Chemical Resistance • High Strength • Semi Crystalline
Uses • Medical/Healthcare • Non-specific Food Applications
Applications
Agency Ratings • FDA Food Contact, Unspecified • MIL P-46183
Rating
Appearance • Beige • Natural Color
Forms • Granules
Processing Method • Extrusion • Injection Molding
Physical Nominal Value (English) Nominal Value (SI) Test Method
Density 1.51 g/cm³ 1.51 g/cm³ ISO 1183
Spiral Flow 4 Internal Method
-- 5 3.35 in 8.50 cm
-- 6 16.1 in 41.0 cm
Molding Shrinkage
Across Flow : 374°F (190°C) 7 0.90 % 0.90 %
Flow : 374°F (190°C) 8 0.30 % 0.30 % ISO 294-4
Water Absorption ISO 62
73°F (23°C), 24 hr, 0.126 in (3.20 mm) 0.040 % 0.040 %
Equilibrium, 73°F (23°C), 0.126 in (3.20 mm), 0.30 % 0.30 %
50% RH
Mechanical Nominal Value (English) Nominal Value (SI) Test Method
Tensile Modulus (73°F (23°C)) 1.71E+6 psi 11800 MPa ISO 527-2
Tensile Stress ISO 527-2
Break, 73°F (23°C) 26100 psi 180 MPa
Break, 257°F (125°C) 16700 psi 115 MPa
Break, 347°F (175°C) 8700 psi 60.0 MPa
Break, 527°F (275°C) 5080 psi 35.0 MPa
Tensile Strain (Break, 73°F (23°C)) 2.7 % 2.7 % ISO 527-2
Flexural Modulus (73°F (23°C)) 1.64E+6 psi 11300 MPa ISO 178
VICTREX® PEEK 450GL30
Polyetheretherketone
Victrex plc
Mechanical Nominal Value (English) Nominal Value (SI) Test Method
Flexural Stress ISO 178
73°F (23°C) 39200 psi 270 MPa
257°F (125°C) 27600 psi 190 MPa
347°F (175°C) 11600 psi 80.0 MPa
527°F (275°C) 7250 psi 50.0 MPa
Compressive Stress ISO 604
73°F (23°C) 36300 psi 250 MPa
248°F (120°C) 23200 psi 160 MPa
392°F (200°C) 7980 psi 55.0 MPa
Impact Nominal Value (English) Nominal Value (SI) Test Method
Charpy Notched Impact Strength (73°F (23°C)) 3.8 ft•lb/in² 8.0 kJ/m² ISO 179/1eA
Charpy Unnotched Impact Strength ISO 179/1U
73°F (23°C) 26 ft•lb/in² 55 kJ/m²
Notched Izod Impact Strength (73°F (23°C)) 4.8 ft•lb/in² 10 kJ/m² ISO 180/A
Unnotched Izod Impact Strength (73°F (23°C)) 29 ft•lb/in² 60 kJ/m² ISO 180
Hardness Nominal Value (English) Nominal Value (SI) Test Method
Shore Hardness (Shore D, 73°F (23°C)) 88 88 ISO 868
Thermal Nominal Value (English) Nominal Value (SI) Test Method
Heat Deflection Temperature ISO 75-2/A
264 psi (1.8 MPa), Unannealed 622 °F 328 °C
Glass Transition Temperature 289 °F 143 °C ISO 11357-2
Melting Temperature 649 °F 343 °C ISO 11357-3
CLTE ISO 11359-2
Flow : > 289°F (> 143°C) 1.0E-5 in/in/°F 1.8E-5 cm/cm/°C
Flow : < 289°F (< 143°C) 1.0E-5 in/in/°F 1.8E-5 cm/cm/°C
Transverse : < 289°F (< 143°C) 2.5E-5 in/in/°F 4.5E-5 cm/cm/°C
Transverse : > 289°F (> 143°C) 6.1E-5 in/in/°F 1.1E-4 cm/cm/°C
Specific Heat (73°F (23°C)) 0.406 Btu/lb/°F 1700 J/kg/°C DSC
Thermal Conductivity (73°F (23°C)) 2.1 Btu•in/hr/ft²/°F 0.30 W/m/K ISO 22007-4
RTI Elec 464 °F 240 °C UL 746
RTI Imp 428 °F 220 °C UL 746
RTI Str 464 °F 240 °C UL 746
Electrical Nominal Value (English) Nominal Value (SI) Test Method
Volume Resistivity 1.0E+16 ohms•cm 1.0E+16 ohms•cm IEC 60093
Electric Strength (0.0787 in (2.00 mm)) 640 V/mil 25 kV/mm IEC 60243-1
Dielectric Constant (73°F (23°C), 2 MHz) 3.20 3.20 IEC 60250
Dissipation Factor (73°F (23°C), 1 MHz) 5.0E-3 5.0E-3 IEC 60250
Comparative Tracking Index 150 V 150 V IEC 60112
Flammability Nominal Value (English) Nominal Value (SI) Test Method
Glow Wire Flammability Index IEC 60695-2-12
0.0787 in (2.00 mm) 1760 °F 960 °C
Fill Analysis Nominal Value (English) Nominal Value (SI) Test Method
Melt Viscosity (752°F (400°C)) 560 Pa•s 560 Pa•s ISO 11443
Injection Nominal Value (English) Nominal Value (SI)
Drying Temperature 248 to 302 °F 120 to 150 °C
Drying Time 3.0 to 5.0 hr 3.0 to 5.0 hr
Hopper Temperature < 212 °F < 100 °C
Rear Temperature 689 °F 365 °C
Middle Temperature 698 to 707 °F 370 to 375 °C
Front Temperature 716 °F 380 °C
Nozzle Temperature 725 °F 385 °C
Mold Temperature 356 to 392 °F 180 to 200 °C
聚醚醚酮,PEEK VICTREX® PEEK 450GL30是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123
13549213581 肖生
|
