|
聚醚醚酮,PEEK VICTREX® PEEK 650CA30东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123
13549213581 肖生
VICTREX® PEEK 650CA30
Polyetheretherketone
Victrex plc
Technical Data
Product Description
High performance thermoplastic material, 30% carbon fibre reinforced PolyEtherEtherKetone (PEEK), semi crystalline, granules for injection moulding and extrusion, low flow, FDA food contact compliant, colour black.
Applications for higher strength and stiffness in a static or dynamic system. Excellent wear resistance, low coefficient of friction, low coefficient of thermal expansion. Chemically resistant to aggressive environments.
General
Material Status • Commercial: Active
• Brochure - Chemical Resistance (English)
• Processing - Victrex PEEK Compression Molding Guide (English)
Literature 1 • Processing - Victrex PEEK Extrusion Guide (English)
Processing - Victrex PEEK Finishing Operations (English)
•
• Processing - Victrex PEEK Injection Molding Guide (English)
• Technical Datasheet (English)
UL Yellow Card 2 • E161131-101136381
Search for UL Yellow Card • Victrex plc
• VICTREX® PEEK
Availability • Asia Pacific • Europe • North America
Filler / Reinforcement • Carbon Fiber, 30% Filler by Weight
• Food Contact Acceptable • High Stiffness • Low Friction
Features • Good Chemical Resistance • High Strength
• Semi Crystalline
• Good Wear Resistance • Low Flow
Agency Ratings • FDA Food Contact, Unspecified Rating
Appearance • Black
Forms • Granules
Processing Method • Extrusion • Injection Molding
Physical Nominal Value (English) Nominal Value (SI) Test Method
Density 4 1.40 g/cm³ 1.40 g/cm³ ISO 1183
Spiral Flow 5 Internal Method
-- 6 3.15 in 8.00 cm
-- 7 14.8 in 37.5 cm
Molding Shrinkage 8 ISO 294-4
Across Flow 0.50 % 0.50 %
Flow 0.10 % 0.10 %
Water Absorption ISO 62
73°F (23°C), 24 hr, 0.126 in (3.20 mm) 0.040 % 0.040 %
Equilibrium, 73°F (23°C), 50% RH 0.30 % 0.30 %
Mechanical Nominal Value (English) Nominal Value (SI) Test Method
Tensile Modulus (73°F (23°C)) 3.92E+6 psi 27000 MPa ISO 527-2
Tensile Stress ISO 527-2
Break, 73°F (23°C) 36300 psi 250 MPa
Break, 257°F (125°C) 21800 psi 150 MPa
Break, 347°F (175°C) 12300 psi 85.0 MPa
Break, 527°F (275°C) 7250 psi 50.0 MPa
Tensile Strain (Break, 73°F (23°C)) 2.2 % 2.2 % ISO 527-2
Flexural Modulus (73°F (23°C)) 3.34E+6 psi 23000 MPa ISO 178
VICTREX® PEEK 650CA30
Polyetheretherketone
Victrex plc
Mechanical Nominal Value (English) Nominal Value (SI) Test Method
Flexural Stress ISO 178
73°F (23°C) 53700 psi 370 MPa
257°F (125°C) 36300 psi 250 MPa
347°F (175°C) 17400 psi 120 MPa
527°F (275°C) 8700 psi 60.0 MPa
Compressive Stress ISO 604
73°F (23°C) 40600 psi 280 MPa
248°F (120°C) 26100 psi 180 MPa
392°F (200°C) 8700 psi 60.0 MPa
Impact Nominal Value (English) Nominal Value (SI) Test Method
Charpy Notched Impact Strength (73°F (23°C)) 5.0 ft•lb/in² 11 kJ/m² ISO 179/1eA
Charpy Unnotched Impact Strength ISO 179/1U
73°F (23°C) 29 ft•lb/in² 60 kJ/m²
Notched Izod Impact Strength (73°F (23°C)) 5.7 ft•lb/in² 12 kJ/m² ISO 180/A
Unnotched Izod Impact Strength (73°F (23°C)) 29 ft•lb/in² 60 kJ/m² ISO 180
Thermal Nominal Value (English) Nominal Value (SI) Test Method
Heat Deflection Temperature ISO 75-2/Af
264 psi (1.8 MPa), Unannealed 631 °F 333 °C
Glass Transition Temperature 289 °F 143 °C ISO 11357-2
Melting Temperature 649 °F 343 °C ISO 11357-3
CLTE ISO 11359-2
Flow : > 289°F (> 143°C) 3.3E-6 in/in/°F 6.0E-6 cm/cm/°C
Flow : < 289°F (< 143°C) 3.3E-6 in/in/°F 6.0E-6 cm/cm/°C
Transverse : < 289°F (< 143°C) 2.8E-5 in/in/°F 5.0E-5 cm/cm/°C
Transverse : > 289°F (> 143°C) 7.5E-5 in/in/°F 1.4E-4 cm/cm/°C
Specific Heat (73°F (23°C)) 0.430 Btu/lb/°F 1800 J/kg/°C DSC
Thermal Conductivity (73°F (23°C)) 6.6 Btu•in/hr/ft²/°F 0.95 W/m/K ISO 22007-4
Electrical Nominal Value (English) Nominal Value (SI) Test Method
Volume Resistivity 9 (73°F (23°C)) 1.0E+5 ohms•cm 1.0E+5 ohms•cm IEC 60093
Fill Analysis Nominal Value (English) Nominal Value (SI) Test Method
Melt Viscosity (788°F (420°C)) 775 Pa•s 775 Pa•s ISO 11443
Injection Nominal Value (English) Nominal Value (SI)
Drying Temperature 248 to 302 °F 120 to 150 °C
Drying Time 3.0 to 5.0 hr 3.0 to 5.0 hr
Hopper Temperature < 212 °F < 100 °C
Rear Temperature 734 °F 390 °C
Middle Temperature 761 °F 405 °C
Front Temperature 770 °F 410 °C
Nozzle Temperature 779 °F 415 °C
Mold Temperature 356 to 410 °F 180 to 210 °C
Injection Notes
Runner: Die / nozzle >3mm, manifold >3.5mm
Gate: >2mm or 0.5 x part thickness
聚醚醚酮,PEEK VICTREX® PEEK 650CA30是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123
13549213581 肖生
|
